Get the supplies from the Venue Valet customer kit. These kits are left at the theater after installation to provide repair materials. Please contact us at support@venue-valet.com if you have trouble locating the kit.
You need at least 2 of the orange colored connectors, called UY2, (see pic) and the yellow handled UY2 pliers.
UNPLUG THE POWER SUPPLY.
Cut the UY2 connectors off the connected red and black wire.
Then push the 2 red wires into one connector and do the same with the black wires. You do not need to strip the wires. Just push them in as is. Using the yellow handled UY2 crimpers, crimp connector all the way (see video). The UY2 should have the orange part level with the white part.
To confirm that the power supply is working, connect it to a working outlet and check that a red LED is glowing on the power supply
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article